フェラーリ 488ピスタの各部純正戻しと法令12ヶ月点検を行いました。
社外パーツで仕様変更されていた1台を、純正の姿へ戻す作業です。

主な作業内容は次のとおりです。
・エキゾーストシステムを純正へ戻し(触媒・リアマフラーを純正に戻し、社外モジュールを取り外し)
・ローダウンスプリングから純正コイルスプリングへ戻し(ショックアブソーバーの脱着・分解、リアアッパースプリングスペーサー交換、車高調整、ホイールスペーサー取り外し)
・4輪ホイールアライメントの測定・調整(前後キャンバー、トゥ調整)
・法令12ヶ月点検
・システムテスター診断(サービスインターバルのリセットを含む)
・エンジンオイルとオイルエレメントの交換
・ワイパーブレードとエアコンフィルターの交換

スプリングはフロント、リアの順に交換を進め、純正マフラーの取り付けとアライメント調整まで行って仕上げました。

仕様変更された車両を純正に戻す作業は、部品の適合確認と調整の積み重ねが大切です。

フェラーリをはじめ欧州車の修理・整備は、指定工場のDTSへお気軽にご相談ください。

お問い合わせは公式LINEからも受け付けています:https://lin.ee/rsIS5NY
— English —
Ferrari 488 Pista — returned to stock, with its statutory 12-month inspection.
This 488 Pista had been modified with aftermarket parts, and our job was to bring it back to its factory specification.
Main work carried out:
– Returned the exhaust system to stock — refitted the factory catalytic converters and rear silencer, and removed the aftermarket module
– Replaced the lowering springs with factory coil springs — shock absorbers removed and stripped, rear upper spring spacers renewed, ride height set, and wheel spacers removed
– Four-wheel alignment measured and adjusted — front and rear camber and toe
– Statutory 12-month inspection
– System tester diagnosis, including the service interval reset
– Engine oil and oil filter changed
– Wiper blades and cabin air filter changed
The springs were renewed front first, then rear, and the car was finished with the factory silencer fitted and the alignment set.
Returning a modified car to stock takes careful parts checking and patient adjustment, step by step.
DTS is a European car specialist and a government-designated inspection workshop in Nagoya, Japan.
You can also reach us via our official LINE: https://lin.ee/rsIS5NY
